EZ-Lock Docking Devices

BL-7317 Docking Base

The enhanced BL-7317 Docking Base is a product of our more than twenty years of research and hands-on experience.  The basic design is based on the time and street proven performance of the BL-6290 Docking Base with the  addition of advanced features that promote a longer service life as well as simplifying routine maintenance.

Features

·        Hardened Steel Reinforcement

·        Accepts the Optional Remote Cable Release

·        Durable Powder Coated Finish

·        Includes the Dependable ECU-3 Electronics Package

The GL-7317 Docking Base sets the standard for the next generation of wheelchair securement devices.

BL-6290 Docking Base

The introduction of the first EZ Lock BL-6290 Docking System in the mid eighties revolutionized the way people thought about wheelchair accessible mobility.  Finally, a versatile, reliable, and safe alternative to cumbersome straps and ratchets.

Features

·        Over Twenty Years of Proven Performance

·        Accepts the Optional Remote Cable Release

·        Durable Powder Coated Finish

·        Includes the Dependable ECU-3 Electronics Package

• Includes the Dependable ECU-3 Electronics Package

The EZ Lock Wheelchair Docking System has helped thousands of wheelchair users worldwide, to overcome the obstacles associated with driving from a wheelchair.

ECU-3 Control System

EZ Lock has the most reliable and easy to use control systems on the market.  Our many years of experience have allowed us to identify any potential problems  areas that might exist in the circuitry and correct, or "beef up" the circuit when necessary.

This course of action has resulted in a nearly "bullet-proof" set of system controls that will provide years of trouble-free operation.

Features

·        LED indicator Lights and Audible Alarm Display System Status

·        Large, Easy to Depress Switches

·        Back-lit Release Switch for Night Time Operation

·        System Deactivation Switch for When the Docking Base is Unoccupied

·        ECU-3 Electronics are included in both the BL-7313 and BL-6290 docking base kits

The reliability of our control systems are part of what make EX Lock the Worlds #1 choice for wheelchair docking security.

Interface Brackets

Many difference basic manual wheelchairs may be equipped with the basic "H" bracket configuration.  The intended wheelchair must be constructed of round steel tubing with an outside diameter of no less than 7/8" and no greater than 1-1/4".  The wheelchair must also have a minimum of 3 inches ground clearance the entire length of the wheelchair.  To determine the correct interface bracket measure the tubing diameter, also measure the height of the lowest frame tubing (running front to back) from the floor.

Open Frame wheelchairs typically do not have the lower frame tubing required to attach an interface bracket and are not recommended for use with the EZ Lock system.  The intended wheelchair should have a backrest that extends upwards to at least the user's lower shoulders, and if intended for a driver application must be able to utilize the front stabilizer STABL-VT.  One piece foot-rests often prevent use of the stabilizer and are therefore not recommended for use in the driver's position with our system.

Seatbases

The SB-4697 Removable Seatbase allows use of the OEM seating at the wheelchair docking station.  The Seatbase is intended for modified vehicles that have a 4 - 6 inch dropped floor.

The SB-4697 locks into the EZ Lock docking base exactly as the wheelchair does with the exception of two clamping hooks applied to the front to provide additional stability.